TOYOTA LANDCRUISER PRADO ENGINE GUARDIAN EG3 WATCHDOG SENSOR OVERHEATING ALARM

Description

ENGINE GUARDIAN
EG3
(2012 New version)
NEW FEATURE WITH PUSH BUTTON, EASY TO CHANGE SETTING,
OIL PRESSURE SWITCH INPUT
,
3 x RELAY CONTROL OUTPUT
, WARNING TEMPERATURE SETTING FROM 0 ~ 150°C, PUSH BUTTON TO TEMPORARY INCREASE SETTING BY 5 °C, 10 °C FOR DRIVING MOUNTAIN ROAD
"PUSH BUTTON"
"DUAL BUZZER"
" 3 RELAY OUTPUT, 1 RELAY + SOCKET INCLUDED"
"CONTROL FACTORY HORN AS OVERHEATING ALARM"
"OIL PRESSURE SWITCH INPUT"
"FREE 1 RELAY + SOCKET"
"OPTIONAL 2nd SENSORS FOR "
"FREE SHIPPING WORLDWIDE"
Minimum investment with maximum engine protection
"2 Years Warranty"
Monitor your
ENGINE TEMPERATURE
to prevent expensive engine repair
"
Dual Buzzer,
One in Digital Display, One in ECU,
with switch to turn on/off"
Real time monitoring engine temperature, Over heating temperature alarm and display.
Easy installation
, work with any vehicle, Trucks, Tractors, Boats, Machines.
Engine Guardian EG3, This system can help to prevent overheating due to:
- Coolant loss
- Hose leaks
- Malfunctioning thermostat
- Blockage in the radiator or hose
- Malfunctioning water pump
- Detect any cooling system problem due to the age of part/s
OEM look digital display with buzzer, build in
selectable in
Celsius
or
Fahrenheit
Warning Temperature is Adjustable from
0°C
~
150°C
or
32°F
~ 302
°F
Detect Temperature from
-19°C
~
165°C
or
-2°F
~
329°F
Build in Cooling Fan Override Control
and
Horn control alarm
(1 relay included, 3 relay output)
Engine Guardian EG3 - Dual Sensor Demo
Engine Guardian EG3 - Single sensor with 3 relay control
Engine Guardian EG3 - Oil Pressure Switch Input
Engine Guardian EG3 - Dual sensor with 3 relay control
Description:
Most vehicles have a temperature gauge, but it lacks the ability to provide an audible warning when problem exists. This system will show the real-time engine temperature on a digital display. If the engine overheats, the Engine Guardian will start beeping intermittently to warn the driver. When the engine temperature continuously climbing, it will beep continuously. The main purpose of this device is to protect the car engine from overheating.
Typically, the engine temperature will increase beyond normal operating temperatures before serious damage starts setting in. As the Engine Guardian will detect abnormally high engine temperatures, and provide an audio as well as visual guide to the operating temperatures of the engine, the driver will be able to judge and work to reduce the operating temperature (slow down, or stop the car for a while). This will reduce the repair cost and reduce the likelihood of needing and engine replacement. Additionally, the driver and passengers will not be stranded due to an overheated engine.
Feature:
- Alert driver when engine temperature is in the critical range.
- Optional function to override factory cooling fan system.
- Digital display of temperature
selectable
in
Celsius
or
Fahrenheit
.
- Simple wiring - Supplied external sensor.
- Three relay output control individually
- Rotatable display for easy mounting at any direction and any position.
- Smaller control unit for easy installation.
- Build-in speaker as backup output to alert using audible beeps.
- Oil pressure switch input.
Benefits:
-Prevent expensive engine repair.
-Real time monitoring of engine temperature
-Reduce likelihood of engine overheating and stranding the driver
-Can help to prevent overheating due to:
- coolant loss
- hose leaks
- malfunctioning thermostat
- blockage in the radiator or hose
- malfunctioning water pump
Specification:
Input voltage: 12 ~ 24Vdc
Detection temperature: -19°C ~ 150°C
Sensor wire length: 10 ft or 3 meter
Conduit for sensor wire: 5 ft
Parts list:
1. ECU  x 1 pc
2. Display  x 1 pc
3. Sensor  x 1 pc (Optional 2 sensor)
4. Push Button  x 1 pc
5. Power cable  x 1 pc
6. Input / Output wire harness  x 1 Set
7. 12V 30A Relay + Relay socket x 1 Set
8. Accessories pack  x 1 pc
Engine Guardian EG3 Complete Kit