Oil Catch Can Tank w/ Z Bracket For 09-19 Dodge Challenger RAM 1500 5.7L 6.4L

Description

Description
100% Brand New
Material : Raw Aluminum
Hose: Heat / Oil / Petroleum / Goodyear HP 1/2 inch Hose
Filter: Our Unique Three Chamber Design to effectively trap oil
Catch Can Dimensions: 5 1/2" Tall X 2 1/2" Wide
Professional Installation is Highly Recommended (No Instruction Included)
Features
Oil Catch Can Tank w/ Z Bracket For 09-19 Dodge Challenger RAM 1500 5.7L 6.4L
Description
100% Brand New
Material : Raw Aluminum
Hose: Heat / Oil / Petroleum / Goodyear HP 1/2 inch Hose
Filter: Our Unique Three Chamber Design to effectively trap oil
Catch Can Dimensions: 5 1/2" Tall X 2 1/2" Wide
Professional Installation is Highly Recommended (No Instruction Included)
Features
Developed to eliminate oil from entering your intake by engine blow-by, which channels oil and trash into your direct air stream from the valve train. This is a common problem on both brand new and especially older engines, which just suffer more from blow by due to wear and tear.
The most common problem is making your car emit light blueish white smoke upon start up or even during normal driving. The throttle body handles your main air stream and has a breather tube running from the crankcase to the throttle body. The vacuum from the incoming airstream and positive pressure in the crankcase combine to get oil in the air tract.
Every car and vehicle is set up this way to help eliminate the pressure build-up in the bottom end of your engine enabling the piston to move up and down with less resistance.
These catch cans feature a containment system and separator that force all the debris to get captured and contained in the filter while still allowing airflow thus maintaining full function of the breather system.
Installation Instructions
Step 1 - Remove the factory or aftermarket air intake tube. ( Removing 2 hose clamps and 1 sensor plug )
Step 2 - Remove the factory engine cover by lifting the front and pulling towards you. ( Hose Cut-Out n Rear Alignment Pins on Intake Cover )
Step 3 - Remove the PCV Hose from the Throttle Body and Top of Intake Manifold ( Remove the 2 rubber ends on each side for a much cleaner install than the 2 Adapter Barbed Fittings )
Step 4 - Install the the Dodge Ram Catch Can in the Hole in the Front of the Cylinder Head. ( The Mounting Hole is just at the Lower Left of the Freeze Out Plug in the Passenger Cylinder Head )
Step 5 - Now you can Install the 1/2" Hoses on each side of the UPR Dodge Ram Catch Can. ( Catch Can has a 1/2" Straight Barb Fitting for a Straight Shot to the Intake Manifold)
Step 6 - Re-install your Air Intake Hose and Factory Engine Cover to Finish. ( Now Double Check all your Work )
Fitment
2009-2019 Dodge Ram 1500 2500 3500 5.7L 6.4L HEMI (8 Speed Transmission)
Dodge Charger, Dodge Challenger, Chrysler 300, fits 6.4L SRT8 Charger-Challenger- 300
Package Including
Billet catch can
Allen wrench
Z bracket
1/2 inch Nickel fittings
1/2 inch Goodyear HP Hose
As the picture shown
Item Specifics
Brand
Unbranded
Manufacturer Part Number
Does not Apply
Color
Black
Catch Can Dimensions
5 1/2" Tall X 2 1/2" Wide
Hose
1/2 inch Goodyear HP Hose
Fitting
1/2 inch Nickel fittings
Material
Aluminum
UPC
Does Not Apply
Warranty
Yes
Oil Catch Can Tank w/ Z Bracket For 09-19 Dodge Challenger RAM 1500 5.7L 6.4L
Description
100% Brand New
Material : Raw Aluminum
Hose: Heat / Oil / Petroleum / Goodyear HP 1/2 inch Hose
Filter: Our Unique Three Chamber Design to effectively trap oil
Catch Can Dimensions: 5 1/2" Tall X 2 1/2" Wide
Professional Installation is Highly Recommended (No Instruction Included)
Features
Developed to eliminate oil from entering your intake by engine blow-by, which channels oil and trash into your direct air stream from the valve train. This is a common problem on both brand new and especially older engines, which just suffer more from blow by due to wear and tear.
The most common problem is making your car emit light blueish white smoke upon start up or even during normal driving. The throttle body handles your main air stream and has a breather tube running from the crankcase to the throttle body. The vacuum from the incoming airstream and positive pressure in the crankcase combine to get oil in the air tract.
Every car and vehicle is set up this way to help eliminate the pressure build-up in the bottom end of your engine enabling the piston to move up and down with less resistance.
These catch cans feature a containment system and separator that force all the debris to get captured and contained in the filter while still allowing airflow thus maintaining full function of the breather system.
Installation Instructions
Step 1 - Remove the factory or aftermarket air intake tube. ( Removing 2 hose clamps and 1 sensor plug )
Step 2 - Remove the factory engine cover by lifting the front and pulling towards you. ( Hose Cut-Out n Rear Alignment Pins on Intake Cover )
Step 3 - Remove the PCV Hose from the Throttle Body and Top of Intake Manifold ( Remove the 2 rubber ends on each side for a much cleaner install than the 2 Adapter Barbed Fittings )
Step 4 - Install the the Dodge Ram Catch Can in the Hole in the Front of the Cylinder Head. ( The Mounting Hole is just at the Lower Left of the Freeze Out Plug in the Passenger Cylinder Head )
Step 5 - Now you can Install the 1/2" Hoses on each side of the UPR Dodge Ram Catch Can. ( Catch Can has a 1/2" Straight Barb Fitting for a Straight Shot to the Intake Manifold)
Step 6 - Re-install your Air Intake Hose and Factory Engine Cover to Finish. ( Now Double Check all your Work )
Fitment
2009-2019 Dodge Ram 1500 2500 3500 5.7L 6.4L HEMI (8 Speed Transmission)
Dodge Charger, Dodge Challenger, Chrysler 300, fits 6.4L SRT8 Charger-Challenger- 300
Package Including
Billet catch can
Allen wrench
Z bracket
1/2 inch Nickel fittings
1/2 inch Goodyear HP Hose
As the picture shown
Item Specifics
Brand
Unbranded
Manufacturer Part Number
Does not Apply
Color
Black
Catch Can Dimensions
5 1/2" Tall X 2 1/2" Wide
Hose
1/2 inch Goodyear HP Hose
Fitting
1/2 inch Nickel fittings
Material
Aluminum
UPC
Does Not Apply
Warranty
Yes
Payment
We only accept
eBay Payment
and other payments through eBay.
Credit Cards processed by eBay.
Shipping
Item will be shipped from our
USA warehouse which located in California / New Jersey / Atlanta / Houston by UPS / Fedex / USPS within
1-3 business days
.
Domestic orders usually takes
1-5 days
to arrive.
Please make sure your address is the right address in eBay before payment.
All Friday orders will be shipped on next Monday morning.
Return
60 days
Money-Back Guarantee.
You can return the UNUSED item back to us for a full refund.
Please contact us for return process before you return the item.
If we sent wrong item, we will pay for return shipping fee.
If buyer ordered wrong item or the item not fits for your car, buyer pays return shipping fee.
30 days money back, buyer pays return shipping
Feedback
Your feedback is
very important
to us!
Do not hesitate to contact us before leaving any neutral or negative feedback.
Customer
Please feel free to contact us by ebay message.
All messages will be replied within
1 business day
.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Fog/Driving Lights
Fuel Tanks
Fuel Inject. Controls & Parts
Power Steering Pumps & Parts
Exhaust Pipes & Tips
Other
Hot Item
4 6 8 10 12 AN Hose End Fitting Push On Lock Adapter For Oil Fuel Hose Line
USD 3.15
20 Feet Black AN6 Nylon & Stainless Steel Braided Fuel Oil Gas Line Hose -6AN
USD 27.53
AN4/AN6/AN8/AN10/AN12 Swivel Hose End Fitting Adapter For Oil/Fuel/Gas Hose Line
USD 4.00
Black Fuel Hose Oil Gas Line AN4-AN6-AN8-AN10-AN12 Nylon/Stainless Steel Braided
USD 8.99
4AN/6AN/8AN/10AN/12AN Fuel/Oil/Gas Hose Line Stainless Steel Braided Silver -AN
USD 8.99
New List Item
20FT Braided 5/8 Fuel Line Rubber Hose with 10AN Hose Fitting Hose Separator Kit
USD 85.00
Stainless Headers For Chevy GMC Avalanche Silverado 00-06 4.8L 5.3L V8 New
USD 131.94
For Dodge Charger Magnum Challenger 5.7L Stainless Long Headers Chrysler 300C
USD 188.33
Fit 1999-2004 Land Rover Discovery 2 II Cold Ram Intake Snorkel Set New
USD 102.99
Fit 6.5 L 6.2 L Diesel Fast Start Glowplug GMC Hummer Chevy 8 Set Glow Plug
USD 21.54
Oil Catch Can Tank w/ Z Bracket For 09-19 Dodge Challenger RAM 1500 5.7L 6.4L
Description
100% Brand New
Material : Raw Aluminum
Hose: Heat / Oil / Petroleum / Goodyear HP 1/2 inch Hose
Filter: Our Unique Three Chamber Design to effectively trap oil
Catch Can Dimensions: 5 1/2" Tall X 2 1/2" Wide
Professional Installation is Highly Recommended (No Instruction Included)
Features
Developed to eliminate oil from entering your intake by engine blow-by, which channels oil and trash into your direct air stream from the valve train. This is a common problem on both brand new and especially older engines, which just suffer more from blow by due to wear and tear.
The most common problem is making your car emit light blueish white smoke upon start up or even during normal driving. The throttle body handles your main air stream and has a breather tube running from the crankcase to the throttle body. The vacuum from the incoming airstream and positive pressure in the crankcase combine to get oil in the air tract.
Every car and vehicle is set up this way to help eliminate the pressure build-up in the bottom end of your engine enabling the piston to move up and down with less resistance.
These catch cans feature a containment system and separator that force all the debris to get captured and contained in the filter while still allowing airflow thus maintaining full function of the breather system.
Installation Instructions
Step 1 - Remove the factory or aftermarket air intake tube. ( Removing 2 hose clamps and 1 sensor plug )
Step 2 - Remove the factory engine cover by lifting the front and pulling towards you. ( Hose Cut-Out n Rear Alignment Pins on Intake Cover )
Step 3 - Remove the PCV Hose from the Throttle Body and Top of Intake Manifold ( Remove the 2 rubber ends on each side for a much cleaner install than the 2 Adapter Barbed Fittings )
Step 4 - Install the the Dodge Ram Catch Can in the Hole in the Front of the Cylinder Head. ( The Mounting Hole is just at the Lower Left of the Freeze Out Plug in the Passenger Cylinder Head )
Step 5 - Now you can Install the 1/2" Hoses on each side of the UPR Dodge Ram Catch Can. ( Catch Can has a 1/2" Straight Barb Fitting for a Straight Shot to the Intake Manifold)
Step 6 - Re-install your Air Intake Hose and Factory Engine Cover to Finish. ( Now Double Check all your Work )
Fitment
2009-2019 Dodge Ram 1500 2500 3500 5.7L 6.4L HEMI (8 Speed Transmission)
Dodge Charger, Dodge Challenger, Chrysler 300, fits 6.4L SRT8 Charger-Challenger- 300
Package Including
Billet catch can
Allen wrench
Z bracket
1/2 inch Nickel fittings
1/2 inch Goodyear HP Hose
As the picture shown
Payment
We only accept
eBay Payment
and other payments through eBay.
Credit Cards processed by eBay.
Shipping
Item will be shipped from our
USA warehouse which located in California / New Jersey / Atlanta / Houston by UPS / Fedex / USPS within
1-3 business days
.
Domestic orders usually takes
1-5 days
to arrive.
Please make sure your address is the right address in eBay before payment.
All Friday orders will be shipped on next Monday morning.
Return
60 days
Money-Back Guarantee.
You can return the UNUSED item back to us for a full refund.
Please contact us for return process before you return the item.
If we sent wrong item, we will pay for return shipping fee.
If buyer ordered wrong item or the item not fits for your car, buyer pays return shipping fee.
30 days money back, buyer pays return shipping
Feedback
Your feedback is
very important
to us!
Do not hesitate to contact us before leaving any neutral or negative feedback.
Customer
Please feel free to contact us by ebay message.
All messages will be replied within
1 business day
.