Alignment 1.25" Next Generation Laser Collimator for Newtonian Telescopes -...

Description

Alignment 1.25" Next Generation Laser Collimator for Newtonian Telescopes - with This Laser You can collimate Your Newtonian Telescope Just in Few Minutes(Without Battery)
Product Details
Product Dimensions: 9.84 x 7.87 x 1.5 inches
Item Weight: 3.87 ounces
Item model number: SKU_QHCE002
Manufacturer: SOLOMARK
Brand: SOLOMARK
Power Source: Battery Powered
Item Weight: 0.11 Kilograms
Designed for Reflector telescope, fit for standard 1.25 inch diameter. Red laser collimation beam with 7 brightness levels, wavelength 635-655 nm; Output power: less than 5mw, much safer for your eyes. This sturdy laser unit allows you to swiftly and precisely collimate your Newtonian telescope. Only when the optics have been accurately collimated can the telescope offer you its full performance.
The precision-made aluminium housing of the laser unit has a front opening from which the laser beam can be emitted. In order to obtain an optimal adjustment, it has a side window allowing a disk oriented at 45° with a central hole to be viewed.This can be then later be used to see whether the laser is reflected back on itself, indicating well collimated optics.
Built with metal material. CR2032 Lithium Cell battery (Not include) ; Accurate collimation in a few minutes provide a more clearer image. The telescope can be collimated by just one person.
The laser comes fully adjusted. It can however be further adjusted if required. It has three openings for adjustment, arranged at 120°, which are initially sealed. The battery for the laser can be exchanged at any time; the small screw cap at the rear of the laser must be first unscrewed to allow this.
It is very simple to get the optimum performance out of your telescope.
This SOLOMARK handy and useful collimation aid is ideal for all Newtonian telescopes. No matter which day- or nighttime - main and secondary mirror can be aligned quick & easy. Scope of delivery: - 1.25" laser collimator incl. batteries - collimation manual High precision Laser collimator (metal housing) to collimate Newtonian telescopes -- no plastic parts -- comfortable 45° view -- big on/off switch -- for 1.25" The collimator is adjustable. It keeps its adjustent in normal use, even after a battery change. Should it accidentally be dropped on a hard surface, it can easily be adjusted afterwards. The adjustment screws are locked by soft inserts. laser situated in a focuser. The reflected red dot indicating a slightly decollimated system in this case can be seen clearly. Technical details: -- completely metal design -- Battery included -- Laser factory-adjusted Delivery content: -- Laser collimator with battery.