99-03 HPOP CROSSOVER 7.3L SUPERDUTY POWERSTROKE HIGH PRESSURE OIL LINE (HPx)

Description

CNC FABRICATION, LLC 7.3L POWERSTROKE (HPx) CROSSOVER LINE
WE HAVE SOLD OVER
10,000
, AND ARE RATED #1 BY GOOGLE AS THE MOST SEARCHED LINE WITHOUT PAYING FOR AD-WORDS.
100% SELLER FEEDBACK
RATING AND WE ARE EXCLUSIVE TO FORD POWERSTROKE
DIESEL
PERFORMANCE WORLD
WITH 12
AUTHORIZED
DEALERS WE HAVE NATIONWIDE.
This in-house
CNC FABRICATION, LLC HPx
(
made and assembled here in OHIO
) line hose utilizing DuPont Teflon lining with a burst pressure rating of 16,000psi and working temperature rating of 400*F. Comes with Genuine Parker fittings
with
Viton high temp o-rings
(IF YOUR ENGINE OIL IS THIS HOT, YOU HAVE BIGGER ISSUES TO WORRY ABOUT).
SEE GRAPH FOR THE ICP CHANGE BEFORE AND AFTER HPX INSTALL
The HPx line connects the two heads to help balance the high pressure oil system in each head.  It does not create more horsepower, but the majority of owners see a slight to significant decrease in engine idle noise.  This is due to the Helmholtz Resonance that is created from the injectors firing so quickly, and the hpop cannot react quick enough to balance/absorb on its own from back pressure spikes within the system.  So when the tiny spikes happen, the HPx line sends the pressure back and forth through the heads instead of hammering on the pump itself.
We had one customer conduct a decibel reading and recorded a 4db reduction in engine noise after the installation.
We certainly are not the cheapest, because we don't use cheap parts...period.
SEE PICTURES ABOVE OF THOSE USING STANDARD HYDRAULIC HOSE.
**Be mindful of other shops selling standard industrial hydraulic hose.  We have been around the fluid power industry for 20 years and standard rubber hose will not hold up to the heat cycles of the engine and the outer rubber will typically dry rot and crack after a few years. Our lines are specifically engineered for this application. **
No other line has this high of internal working temperature rating except the Ford OEM lines themselves.  Most lines will only have a rating of 260-302*F rating at best.
NOTE
:  IF YOU ARE UNSURE OF INSTALLING THESE LINES YOURSELF, PLEASE SEEK OUT A COMPETENT AND QUALIFIED TECHNICIAN TO INSTALL THE LINES.
THE FITTINGS IN THE HPOP ARE TO BE TORQUED TO 28FT/LBS, HOSE ENDS ARE 18-20FT/LBS, FITTINGS IN THE HEADS ARE 23FT/LBS.
*THERE IS A 10% RESTOCK FEE FOR BUYER REMORSE*